UL1642/KC/UN38.3 Approved Good Quality 803035 3.7v 800mah Lithium Polymer Lipo Battery

UL1642/KC/UN38.3 Approved Good Quality 803035 3.7v 800mah Lithium Polymer Lipo Battery

1. Model number: AUK803035

2. Voltage: 3.7v

3. Capacity: 800mAh

4. Dimension with PCM: 8.2*31*37.5mm

5. Certificate: UL1642/KC/UN38.3

Item			Rating	Note
3.1 Capacity		Typical	800mAh	Discharge:0.2CmA cut off Voltage:3V for cell
		Minimum	800mAh
3.2 Nominal Voltage			Average 3.7V	Discharge:0.2CmA cut off Voltage:3V for cell
3.3 AC Impedance Resistance			≤165mΩ
3.4 Discharge Cut-off Voltage			3.00V
3.5 Charge Current			160mA	Standard Charge
3.6 Charge Voltage			4.2V
3.7 Max. Charge Voltage			4.23V
3.8 Storage humidity			< 75%RH	Hygrometer
3.9 Fast Charge current			800mA	1.0CmA
3.10 Fast Discharge Current			800mA	1.0CmA
3.11 Weight			Approx 15.8g
3.12 Shipping Voltage			>3.88V	70 ~80% of full charged
3.13 Operating Temperature	Charge		0~+45℃
	Discharge		-10~+50℃
3.14 Storage Temperature	less than 1 month		-10~+45℃	Recommended storage temperature: 20℃,at the shipment state

  Attention:    It can not be use for any drone or other aircraft !    The maximum charge current: 1C    Maximum discharge current: 1C    Discharge cut-off voltage: 2.75V    The discharge temperature: -20 degrees C~+60 degrees C    Charging time: 2-4hrs (standard); 2hrs (fast)    Protection function: over charge, over discharge, over current, short circuit protection, over temperature protection  

Precautions:

1. Before using this product, be sure to read the product manual in detail, and operate correctly according to the instructions in the manual.

2. Do not disassemble the device by yourself. This product is not equipped with any parts that can be disassembled/repaired by yourself.

3. It is strictly forbidden to make the product object or heat source contact. It is strictly forbidden to throw this product into fire or water, and it is strictly forbidden to charge the mobile power in an environment below 0°C.

4. Do not vibrate, knock or impact this product violently. If the product encounters strong impact, strong extrusion, or falls from a high place, causing the shell to deform or bulge, please stop using the product.

5. Do not expose this product to sunlight, do not place this product in an environment with corrosive substances, and do not use other chemical solutions to clean this product.

6. If the product is abnormally hot or leaks, please stop using it immediately. If the liquid accidentally splashes into the eyes, do not rub the eyes, rinse the eyes with clean water immediately, and seek medical attention immediately if it is serious.

7. In order to avoid abnormality of this product, it is recommended to use the charging cable, adapter and power supply device produced by the original factory.

8. Please dispose of waste mobile power according to national environmental protection regulations

9. Please keep this product out of the reach of children.

  Payment Terms

  100%T/T in adance, Bank remittance. Paypal ,others

  MOQ

  Please contact us

  Supply ability

  150000 pieces/per week

  Cycle Life

  800 times+

  Business Type

  Manufacturer

  Quality

  "Grade A cells"

  Rechargable

  Yes

  Applicant

  Consumer Electronics

AUK Other Hot Selling Lithium Polymer Battery Model for your Choose

Other lithium polymer battery model as below:

Hunan AUK New Energy Co., Ltd.