UL KC Lithium Polymer Battery 803040 3.7v Lithium Polymer Battery 1000mAh CE ROHS MSDS
| Product Name | Polymer Lithium Battery | Model | 803040 |
| Voltage | 3.7V | Capacity | 1000mAh |
| Charge Voltage | 4.2V | Cut-off Voltage | 3.0V |
| Std. Charging | 0.2C | Max. Charging | 1.0C |
| Warranty | 12 Months | Certification | UL/KC/CE/ROHS/UN38.3/MSDS |
| Application | Electric scooter/Charger | Sample | Support free sample |
Attention: It can not be use for any drone or other aircraft ! The maximum charge current: 1C Maximum discharge current: 1C Discharge cut-off voltage: 2.75V The discharge temperature: -20 degrees C~+60 degrees C Charging time: 2-4hrs (standard); 2hrs (fast) Protection function: over charge, over discharge, over current, short circuit protection, over temperature protection
Precautions:
1. Before using this product, be sure to read the product manual in detail, and operate correctly according to the instructions in the manual.
2. Do not disassemble the device by yourself. This product is not equipped with any parts that can be disassembled/repaired by yourself.
3. It is strictly forbidden to make the product object or heat source contact. It is strictly forbidden to throw this product into fire or water, and it is strictly forbidden to charge the mobile power in an environment below 0°C.
4. Do not vibrate, knock or impact this product violently. If the product encounters strong impact, strong extrusion, or falls from a high place, causing the shell to deform or bulge, please stop using the product.
5. Do not expose this product to sunlight, do not place this product in an environment with corrosive substances, and do not use other chemical solutions to clean this product.
6. If the product is abnormally hot or leaks, please stop using it immediately. If the liquid accidentally splashes into the eyes, do not rub the eyes, rinse the eyes with clean water immediately, and seek medical attention immediately if it is serious.
7. In order to avoid abnormality of this product, it is recommended to use the charging cable, adapter and power supply device produced by the original factory.
8. Please dispose of waste mobile power according to national environmental protection regulations
9. Please keep this product out of the reach of children.
Payment Terms | 100%T/T in adance, Bank remittance. Paypal ,others |
MOQ | Please contact us |
Supply ability | 150000 pieces/per week |
Cycle Life | 800 times+ |
Business Type | Manufacturer |
Quality | "Grade A cells" |
Rechargable | Yes |
Applicant | Consumer Electronics |
AUK Other Hot Selling Lithium Polymer Battery Model for your Choose
Other lithium polymer battery model as below:
| Model | Dimension | With PCM Dimension | Capacity |
| 302025 | 3.0*20*25mm | 3.2*21*27.5mm | 3.7V 100mAh |
| 302530 | 3.0*25*30mm | 3.2*26*32.5mm | 3.7V 180mAh |
| 401824 | 4.0*18*24mm | 4.2*19*26.5mm | 3.7V 180mAh |
| 402525 | 4.0*25*25mm | 4.2*26*27.5mm | 3.7V 200mAh |
| 483450 | 4.8*34*50mm | 5.0*35*52.5mm | 3.7V 850mAh |
| 502030 | 5.0*20*30mm | 5.2*21*32.5mm | 3.7V 240mAh |
| 502525 | 5.0*25*25mm | 5.2*26*27.5mm | 3.7V 180mAh |
| 503030 | 5.0*30*30mm | 5.2*31*32.5mm | 3.7V 430mAh |
| 523450 | 5.2*34*50mm | 5.4*35*52.5mm | 3.7V 1000mAh |
| 553444 | 5.5*34*44mm | 5.7*35*46.5mm | 3.7V 850mAh |
| 553640 | 5.5*36*40mm | 5.7*37*42.5mm | 3.7V 850mAh |
| 553759 | 5.5*37*59mm | 5.7*38*61.5mm | 3.7V 1400mAh |
| 602030 | 6.0*20*30mm | 6.2*21*32.5mm | 3.7V 300mAh |
| 602240 | 6.0*22*40mm | 6.2*23*42.5mm | 3.7V 500mAh |
| 602535 | 6.0*25*35mm | 6.2*26*37.5mm | 3.7V 500mAh |
| 602663 | 6.0*26*63mm | 6.2*27*65.5mm | 3.7V 1000mAh |
| 603030 | 6.0*30*30mm | 6.2*31*32.5mm | 3.7V 520mAh |
| 603040 | 6.0*30*40mm | 6.2*31*42.5mm | 3.7V 750mAh |
| 603048 | 6.0*30*48mm | 6.2*31*50.5mm | 3.7V 900mAh |
| 603450 | 6.0*34*50mm | 6.2*35*52.5mm | 3.7v 1050mAh |
| 702040 | 7.0*21*40mm | 7.2*22*42.5mm | 3.7V 500mAh |
| 753048 | 7.5*30*48mm | 7.7*31*50.5mm | 3.7V 1200mAh |
| 803035 | 8.0*30*35mm | 8.2*31*37.5mm | 3.7V 800mAh |
Company Information
Hunan AUK New Energy Co., Ltd. (AUK Power)
About Us
HUNAN AUK NEW ENERGY Co..Ltd. which was established in May, 2008, is one of the fullest range battery cells and battery packs company.Providing Lithium polymer battery cells and pack, other battery cells and pack.Our products are widely used in Watches,Calculators, Portable Computers, Electric Keys,Camera,Camcorder,Electric Meters, Mobile Phone, PDA, Laptop, flashlights, vacuum cleaners, Emergency lighting, RC models and Communication Equipment (portable radio station, GPS equipment, digital termination devices),Power Tools etc.
Hunan AUK New Energy Co., Ltd.
HUNAN AUK NEW ENERGY CO., LTD is a comprehensive battery of R&D, design, production and
processing as one of high quality battery manufacturer. The company
has a number of more than twenty years specializing in R&D
lithium polymer battery protection areas. Adopting new technology
and new facility to produce Li-ion polymer battery in high power,
high voltage, wide temperature range of battery design, battery
assembly design has its own unique technical ideas, and achieve the
success of many customers at home and abroad to solve a variety of
special purpose battery demand.
Our production capacity reaches 100,000pcs daily production of
polymer battery cells, 200,000pcs daily production of aluminum
shell battery cells and 100,000pcs of ends product battery pack.Our battery has character of big capacity, good safety and long
cycle life. We have successively obtained CE, RoHS, MSDS, UL,
CB/IEC62133, KC, ISO and UN38.3 Certifications.
We always insist “ treat others integrity to establish the credit enterprise ” .
With its attitude to pursuit excellence, is creating a new energy
era of perfect quality, leading Chinese lithium polymer battery
industry and turning itself into a world-class battery company.Only customer’s success is our success!
