Model:2P 3766125
Size:125/66/3.7mm(L*W*H)
Operating Temperature:-20°C-60°C
Capacity:8000 mAh
Rated Voltage: 3.7V
Charging temperature: 0°C-50°C
Charging voltage: 4.2 volts
Discharge voltage: 2.75 volts
Place of origin: China
Battery Type: Lithium Polymer
Chemical type: lithium polymer
Protection function: overcharge, overdischarge, overcurrent, short
circuit
Usage:Remote controller, IPTV Set top box remote controller, LED
lighting, Underwater lighting system, Bluetooth device, Mp3/Mp4
player, Safety lamp, GPS, Mobile phone, E-book, Power bank,
Portable DVD, Walkie taklie, Notebook, Tablet PC, PDA, Game player,
Pos machine, Consumer electronics device, Medical devices, Flash
lighting, Garden lighting, Karaoke, Digital Camera, Driving
recoder, Recording pen, Headset , Dashcam, Satnav, Navigation, Baby
monitor, Navigation, Car camera, Drift camera, Taillight, Bluetooth
speaker, Instrumentation, Smart lock, Medical device, Digital
light, Air purifier, Project Desigh ,Valve Index Controller ,etc.
Features
AUK 2P 3766125 3.7V, 8000mAh rechargeable lithium battery - LiPo battery.
Built in intelligent protection PCB charging module, effectively
preventing overcharging, discharging, overcurrent, and short
circuit.
Electrical characteristics:
1. if your device still have a PCM protector board lie on
motherboard of your device. it will can't work well.
please remove off this PCM from our this li battery. so this
battery can work well.
2. if your old one li battery have a PCM board on top of li
battery. please instead this old pcm to our new li battery . maybe
our PCM board don't fit your device. each device there are
different requirements with PCM board.
3.Standard Charging method :0.5C (constant current)charge to
4.2V,then CV(constant voltage 4.2V)charge till charge current
decline to ≤0.05C
4. Rated Capacity : The capacity means the discharge capacity of
the cell, which is measured with discharge current of 0.2C with
3.0V cut-off voltage after standard charge.
5. Charging time :Standard Charging:3.0 hours(Ref.) ,Rapid charge:
2.0 hours(Ref.)
6. Max. charge current :1.0C
Max. discharge current :1.0C
Discharge cut-off voltage :3.0V
7. Operating temperature :Charging: -20℃~60℃ Discharging:-20℃~60℃
8. Storage temperature : -10℃~ +45℃
9. Cycle life: 600 cycles,Stable performance with 100% in house
testing
10. Warranty: 18 Months
11. Test condition:
Charge:0.5C to 4.2V
Discharge:0.2C to 3.0V
70% or more of 1st cycle capacity at 0.2C discharge of Operation
Self-discharge :Residual capacity >90%
After the standard charging, storied the cells under the condition
for 30 days, then measured the capacity with 0.2C till 3.0V
12:Temperature characteristics :
-20℃: ≥65%
23℃: 100%
60℃: ≥96%
---- According to item at 23±5℃.
----Capacity comparison at each temperature, measured with constant
discharge current 0.2C with 3.0V cut-off. Percentage as an index of
the capacity compared with 100% at 23℃
13 : Mechanical characteristics:
----- Vibration Test : No leakage / No fire
After standard charging, fixed the cell to vibration table and
subjected to vibration cycling that the frequency is to be varied
at the rate of 1Hz per minute between 10Hz an 55Hz,the excursion of
the vibration is 1.6mm.The cell shall be vibrated for 30 minutes
per axis of XYZ axes.
----- Drop Test : No fire/ no leakage.
The cell is to be dropped from a height of meter twice onto
concrete ground.
