Fast Charger 84V 5A Lithium Battery Charger For 72V 12.6V 16.8V
29.4V 33.6V 67.2V 54.6V 10A 8A 20A 30A
Specification
Input: AC 100-240V
Battery Cells: for 2S-20SLi ion Battery PSack
Output: 84V 8A/5A
Charger Type: CC and CV
Battery Charger Case Material: Aluminium
Cooling Way: Built-in Cooling Fan
Certificate: CE SAA FCC ROHS
Operating Temperature: -20 to 60 Degree
Operating Humidity: 20 to 90%RH
Storage Temperature: -40 fo +80 Degree
Input Voltage | 100-240Vac 47-63Hz | Case Material | Aluminum |
Charge Voltage and Current | 84V 5A | Charge Method | CC/CV |
Size | 205x121x50 mm | Weight | 1.2 KG |
Operating Temperature | -20℃ ~ +50℃ | Storage Temperature | -40℃~ +80℃ |
Warranty | 1 Year | Certificate | CE/ROHS/FCC/SAA |
The inditorr of LED: "RED" Means Charging "Green" Means Full of
Electricity |
Protection
Over current protection
Over voltage protection
Short Circuit Protection
Reverse Connection Protection
Usage Introdction
Dual color LED indicator:(Charging:Red; Fully charged or no
load:Green)
Light weight and compact
High efficiency and low power consumption
Protection
Over current protection / Over voltage protection / Short Circuit
Protection / Reverse Connection Protection
Product Advantage
1) Dual color LED indicator:Red means Charing,Green means full
charged.With 1 years warranty.
2) Constant current, constant pressure dual scheme design,
perfectly conform to the lithium battery charging characteristics.
3) The two way average flow scheme is used, when one of them is
damaged, only the charging current is reduced by half, and it can
be used.
4) The charging time is adjustable, with LED indication, precision
voltage and current detection, effectively preventing overcharge
an d completely eliminating charge of discontent and so on.
5)The input and output lines use high quality wires, corrosion
resistance, and no cracking.
6) The shell is PC industrial raw material, fire retardant and
flame retardant, temperature resistance 75 C.
7) With output short circuit protection, even if the output short
circuit will not damage the power supply, when the output short
circuit release, the power supply is still normal output.
8) It has the function of soft start, can withstand frequent switch
start, will not cause damage to the power supply.
9) The enclosure with a fixed installation hole, with a terminal,
the input and output connection is extremely simple, no need to
use a soldering iron.
10) The DC current is precise IC control, non single triode
constant current. Each cycle is monitored and the current limiting
circuit is designed to prevent charge current from being too high,
protect battery and extend battery life.
We can supply120W li ion battery charger 8.4V 12.6V 16.8V 25.2V
29.4V 42V 50.4V 54.6V 58.8V 2A 3A 4A 5A 6A 8A Lithium ion battery
charger
Operating Instructions:
1. Plug the AC-to-DC charger to electrical outlet and connect the
other end to charger
2. LED will change to Green which indicate power is on and ready
for charging mode
3. LED will turn RED, which indicate the battery is charging
4. LED will change from red to green, when the battery is fully
charged
5. LED will change back to green when the charger connector is out
of the battery packs
FAQ:
1. The LED turns off while charging.
-This charger has a build-in thermal protection function. Battery
charging is shut off when the temperature of charger
increases beyond set limit, and LED turns off (no color). Once the
charger temperature drops to acceptable limit, the
charging process is resumed and the LED turns on (Green/Red color).
2. LED color changes to Yellow
-This indicates that battery is not being charged correctly. Remove
the battery pack from Charger and re-insert into
charger. If this occurs repeatedly, either battery is dead or
charger is not working.
For MCU charger sets Yellow LED indicating, it will be charging
normally when LED is yellow.
3. The charger connector connects the battery pack well, but the
LED does not change to RED.
-This indicates that battery is not being charged correctly. Remove
the battery from charger and re-insert into charger.
If this occurs repeatedly, either battery is dead or charger is not
working.
4. LED changes to Green, but the capacity is too low.
-This indicates that battery is not being charged correctly. Remove
the battery from charger, clean the contacts with a
soft clean cloth, re-connect charger. If this occurs repeatedly,
either battery is dead or charger is not working.
FAQ
Q1. How to get your samples?
- Our samples will be charged, we will offer 1-2pcs in usual.
Samples lead time 3 days.The normal express account should be
Fedex, TNT, UPS, DHL or EMS.
Q2. What is your terms and payment terms?
- T/T, Trade assurance,Paypal, Western Union or negotiable with
sales representative.
Q3. Do you inspect the finished products?
- Yes. Each product is 3 times of testing and inspecting before
package, then we have OQC to make sampling
inspecttion to ensure good quality products.
Q4. How do you ship the finished products?
- By sea & Air
Q5. How long is the warranty?
-Warranty is one year.
